FREE Shipping | "We Service What We Sell" | Shop for Portable Speakers, Paper Shredders and Air Mattresses

Back to Top

Latest Review

Support - Portable Speakers

Speaker Operation Manuals for V1-30HP, SV-S350PLUS, SV-X3 Models, SV-X6

 

V1-30HP USB or Li Battery Powered Sound Bar Speakers System
FAQ: The unit is not charging? Please close the latch to hold the battery in place before it can be charged

 

SV-X7

Click to DOWNLOAD: SV-X7 Upgrade firmware (ver 2.3)

SV-X6 Multifunctional FM & MP3 Speakers
Available SV-X6 firmware upgraded. Click Here (This fixes issues with some USB and SD cards not recognizing).

General Operations:
1. Please turn on the speakers by pressing and holding the Play button for 2 seconds.
2. Make sure the volume is turned up
3. Make sure to charge the batteries for up to 4 hours for full charge (last up to 5 hours of continuous play)
4. Please note there are 3 modes of operations - FM, In Line and SD/Udisk. Each mode may have different functions.
5. The speakers will go on standby automatically in 5 mins of inactivity to conserve battery life. You must press and hold Play button to turn on again.
6. Any Apple branded wall USB adapter works with this speaker. You can charge it with a laptop USB port as well.

 

FM Operations:
1. Press the Mode button and switch to FM radio.

2. To find and save all of the radio stations, press the menu button and press it again to Auto Search for radio stations.

3. Make sure you are in an area that can get clear FM reception. 
4. Wait until all the stations cycle through, which takes about 3-5 minutes.
5. After this is done, the first radio station should be selected and you may hear static sounds.
6. Then you can just press the Reverse and Forward buttons change the found stations.

7. While FM station is playing, press the menu button and you can start recording the radio program.

 

Speaker Operations (works with iPad, Android, Blackberry):
1. Press the Mode button and switch to Inline (AUX).

2. You can connect to any mobile device that has a 3.5 headphone jack.

2. Press the Mode button and switch to InLine (shows audio jack icon)

3. Connect the 3.5 mm audio cable on the laptop headphone jack and on the AUX jack on the speaker
4. Make sure the volume on the device is not on Mute and turned up to max

SD Card / USB Flash Drive Operation:
1. Insert a SD card or USB drive into the slot

2. Press the Mode button and switch to SD/USB
3. Wait for a couple of seconds and the music should start playing
4. Please make sure the MP3s are stored in the root directly (without folders) in the SD/USB drive.

5. While a SD card is inserted, press the menu button to use the microphone to as a voice recorder

6. You can replay the sounds by pressing the menu button and selecting the WAV file.

 

Settings Operation:

1. Press the menu button and the Forward button to highlight the Settings icon then press menu again to select it.

2. You can change the display language to any of the 20 languages

3. You can change the display time

4. You can turn on the alarm clock and settings

5. You can see the calendar and set the date

 

Alart Settings:

Press MENU enter main menu, choose SYS setting, then press MENU enter into SYS SETTING. Press  < > button choose tool, and press MENU enter into the tool. Press

 Choose alarm. and press MENU enters into alarm.

1. Press MENU chooses alarm on/alarm off.

2 Time: press MENU enter into time setting, press  < > button setting the hours first, if ok, then press MENU confirm, and press < > button setting the minute, press MENU confirm

3.Cycle: press MENU enter into the cycle, and press MENU the alarm mode (every day, one time, cycle), in the cycle you can choose from Monday to Sunday.

4. Alarm signal: press  < > button to choose alarm signal, press MENU enter into alarm signal, choose the ring embedded or SD card’s file which you want as alarm,

5. Volume: Press  < > button to choose Volume adjust, press MENU enter into Volume and press  to adjust the volume


SimplyVibe SV-S350PLUS (SG-350PLUS) Multifunctional FM & MP3 Speakers

Frequently asked questions:
Q: The 3.5 mm audio cable does not fit my iPad?
A: Try to push the plug with a little force until you hear a click or all the way inserted into the jack. If this doesn't work please email sales@simplyvibe.com for further assistance.

General Operations:
1. Please try turning on the speakers by pressing the middle button until blue lights come on.
2. Make sure the volume is turned up (by pressing and holding the bottom button).
3. Make sure the laptop volume is not on mute and turned up.
4. Make sure to charge the batteries for up to 4 hours for full charge (last up to 5 hours of continuous play)
5. Please note there are 3 modes of operations - FM, AUX and SD/Udisk. Each mode may have different functions for the 3 buttons.
6. The speakers will go on standby automatically in 5 mins of inactivity to conserve battery life
7. Any Apple branded wall USB adapter works with this speaker. You can charge it with a laptop USB port as well.

FM Operations:
1. To find all of the radio stations, you have to perform an auto search. 
2. To do this, please switch to FM mode and press & hold the center button (magnifying glass icon). 
3. Make sure you are in an area that can get clear FM reception. 
4. Wait until all the stations cycle through, which takes about 3-5 minutes.
5. The buttons should stop blinking after the stations have been saved. 
6. Then you can just press the up and bottom to the correctly tuned stations.

Speaker Operations (works with iPad, Android, Blackberry):
1. Switch to AUX mode
2. Connect the 3.5 mm audio cable on the device's headphone jack and on the AUX jack on the speaker
3. Make sure the volume on the laptop is not on Mute and turned up to max
4. Make sure the speaker is turned on by pressing and the holding middle button until it turns blue

SD Card / USB Flash Drive Operation:
1. Switch to SD/UDisk mode that has MP3/WMA music saved in them
2. Plug in SD card or USB drive into the slot (plays MP3 only one at a time)
3. Wait for a couple of seconds and the music should start playing
4. Make sure the speaker is turned on by pressing and holding the middle button until it turns blue


SV-X3 Multifunctional FM & MP3 Speakers

FM Radio Auto Search Operations:
1. To find all of the radio stations, you have to perform an auto search.
2. To do this, please switch to FM mode and press & hold the center button (magnifying glass icon).
3. Make sure you are in an area that can get clear FM reception.
4. Wait until all the stations cycle through, which takes about 2-5 minutes.
6. Then you can just press the left and right to the correctly tuned stations.

Enjoy!

Please email us at sales@simplyvibe.com if you have further questions.

There are no products matching the selection.